top of page

The Pixels to Prototype Dust Boot v3 is here!

I spent hours and hours testing and trying many dust boots on several CNCs that I have had over the years.   I had some that the brush piece would dislodge and cause ruined jobs.  I have had others that made it so frustrating to make tool changes that I tried to avoid them at all costs!  Well after all this trial and error, I have come up with the design you see here -- the Pixels to Prototype v3 dust boot.  This dust boot is designed from the ground up in Fusion360 making it very easy to adjust and adapt for many different machines, spindles, and setups.  If you have a custom need, please to not hesitate to reach out!

Features:

  • Screw clamp for attaching firmly and quickly to the spindle.
  • 70mm (2.75") nylon brush with Magnet attachment.  This also features 4 tabs to prevent the brush dislodging in the middle of a job.  Additional brushes are available in the store and are interchangeable. (Link: https://www.pixelstoprototype.com/product-page/p2p-dust-boot-spare-flex-brush)  ***Please note that brushes may need to be trimmed depending on the machine and tooling.  Please consider a 2nd brush for shorter or larger tooling.***
  • Brush has slit for easy removal to perform tool changes.
  • Quick Connect Hose Adapter - easily remove hose from the boot for tool changes or machine work!
  • We have several colors available -- if you have a specific color preference, please let us know and we will do our best to accommodate!  The default boot color is black or blue for Phantom CNCs.


Spindles:

  • 59mm XCarve Pro - special boot for XCarve Pro CNC Spindle and clearance for spindle shroud
  • 65mm - Fits Makita and Carbide routers, 65mm Spindles.  Designed to be compatible with the Onefinity CNC.
  • 70mm - Fits DeWalt DWP611 router.  Contains slot for collet lock extension.
  • 80mm - Standard 80mm Spindles
  • 80mm Onefinity - Specially designed for the Onefinity Elite CNC
  • 76mm - Phantom SCV44 Spindle
  • 85mm - Phantom 4x8 CNC Spindle
  • 88.9mm - Bosch 1617 Router
  • 100mm - Many spindles, including some ATC spindles.

 

Adapters:

  • Standard boot will have a 4" adapter, but other sizes available upon request.
  • 1.25"OD Adapter - Outside is tapered from 1.21" (30.75mm) to 1.25" (31.75mm) for connection. Designed for the hose to go over the end and be clamped via ziptie. This is designed for a 1.25" plastic ShopVac-type hose.
  • 1.5"ID Adapter - Adapter OD fits the Rockler Dust Collection FlexiPort 1.5" ID
  • 1.75"OD Adapter - Adapter ID is Tapered from (45.45mm) to (44.59mm). OD of adapter is (52.45mm). Designed for the hose to fit inside the adapter. This fits hoses just like the XCarve Dust Shoe and was made as a direct replacement for an Xcarve shoe.
  • 2.25"OD Adapter - Adapter ID is Tapered from (58.15mm) to (57.25mm). OD of adapter is (65.15mm). Designed for the hose to fit inside the adapter. This is designed for a 2.25" plastic ShopVac-type hose.
  • 2.5"OD Adapter - Adapter ID is (52.325mm). OD of adapter is (60.325mm). Designed for a Dust Collection 2.5" Hose to be clamped on the outside of the adapter.
  • 3"OD Adapter - Adapter for 3" Dust Collector Hose
  • 4"OD Adapter - Adapter for 4" Dust Collector Hose

 

Additional Dust Boot Adapters available here: Additional Dust Boot Adapters

 

CNCs Tested:  CNC4Newbie, Onefinity, Workbee, Queenbee, Lead CNC, Phantom, Next Wave Shark, and Custom CNCs!

Pixels to Prototype Dust Boot v3 - Onefinity, CNC4Newbie, Phantom, and MORE

SKU: 10001
$99.99Price
    bottom of page